How do I fix installer encountered error 0x80070422?

Among the error codes users encounter in Windows 7, code 0x80070422 is fairly common. This error can occur when the startup service for Windows Update is set to anything except automatic. Learn how to fix error code 0x80070422 with a few clicks of the mouse.

Windows Update and Error Code 0x80070422

Windows Update can be a bit finicky when it comes to working the way it was designed to work. It doesn’t take much for something to be out of alignment and cause problems. Windows error code 0x80070422 refers to an inability of Windows 7 to startup the Windows Update service so your computer can connect to the update servers at Microsoft. The message accompanying the error code reads:

80070422 SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0×80070422

The frustrating part about this error is that everything with the update service can be working great one day and then cause errors the next. Don’t be too concerned if you get this error; it is very common. Luckily, a quick fix enables you to continue downloading and installing updates for Windows 7. You simply need to edit an option associated with the update service.

Fixing Windows 7 Update Error 0x80070422

Click on Start and type Admin in the Search box. Press the Enter key and Windows 7 opens the Administrative Tools window. Click on Services.

You should now be looking at the Services window. In the right hand pane, locate a service titled Windows Update. Right click on the Windows Update service and choose Properties from the menu.

You should now be looking at the Windows Update Properties (Local Computer) window. Click on the General tab, locate an option labeled Startup Type, and note the current option setting. If the option is set to Manual or Disabled, that is what’s causing the error. Set the option to Automatic (Delayed Start).

However, the option may already be set to either Automatic or Automatic (Delayed Start). This can also be causing error 0x80070422. If you have the option set at Automatic, set it to Automatic (Delayed Start). Likewise, if it is set to Automatic (Delayed Start), set it to Automatic. When you make your selection, click the OK button.

Back on the Services window, make sure the Windows Update Status is Started. If it is set to Started, close the window and you are done. If it is set to anything except Started, close the window and restart your computer.

Windows 7 error 0x80070422 occurs when the Window Update service is not set to start automatically. While disabled, the service cannot run and users of the PC cannot download updates to Windows 7 or updates to software installed on the computer. A quick option change to the Windows Update service fixes the error and allows Windows Update to continue working normally.

Keep in mind that the other option settings Manual and Disabled are not themselves the error. Some administrators prefer to use these settings for the Windows Update service to control how and whether users of a PC can initiate update downloads and installation. Most home users, however, should set the service to one of the automatic settings.

Microsoft regularly delivers free Windows Update for Windows OS to make sure you get access to all the new features and security protection. Windows Updates generally get installed automatically but you can also choose to update manually.

Now, the error code 0x80070422 is one of the many Windows Update bugs that could occur due to some corrupted system files on your computer. Many users have also reported that the Windows 10 update error 0x80070422 can also come up when they try and check for updates. In some other cases, it has occurred while installing the Microsoft apps.

Don’t worry because the 0x80070422 error can be fixed quite easily. Some of the solutions you can try out are disabling IPv6, restarting the Network List service, running the Windows Update Troubleshooter, and so on. This article will give you details about several possible ways to fix the Windows 10 update error 0x80070422. Keep reading!

The 0x80070422 error is a Windows update error. If it shows up while you’re installing some updates, the pending Windows updates won’t get installed properly. A message might accompany the error code like “There were some problems installing updates” or something like “Windows Update is disabled.”

The Windows update error 0x80070422 will prevent updating the system properly and that can lead to security issues if not fixed in time. 

11 Ways To Fix Windows 10 Update Error 0x80070422

The Windows Update Error 0x80070422 comes up when the updates are not installed correctly or when the system files are corrupted. It is relatively easier to fix when compared to other errors. Let’s check out the top 11 ways to fix the Windows 10 update error 0x80070422:

1. Restart Your Computer
2. Start/Restart The Windows Update Service
3. Run System File Checker (SFC) And DISM
4. Make Sure The Related Services Are Running
5. Run Windows Update Reset Script
6. Disable Internet Protocol Version 6
7. Enable/Disable Network List Service
8. Create A .BAT File To Fix This Error
9. Check Registry Entries
10. Try A Repair Upgrade With The Media Creation Tool
11. Run Windows 10 Update Troubleshooter

Method 1. Restart Your Computer

This advice works for all errors. The first fix you should try out when you face an error is restarting your device to check if that fixes it. Restarting your system can fix all temporary issues, so you won’t have to waste time working on an issue that can be resolved easily. 

After you have restarted your PC, try installing the Windows updates again. If the error still comes up, move on to the next solutions.

Method 2. Start/Restart The Windows Update Service

The Windows Update service is responsible for taking care of the Windows updates and other related processes. If the Update service stops, the error code 0x80070422 will appear when you install the Windows updates. So, the Windows Update service needs to run properly to make sure that the update process doesn’t get interrupted. 

Follow the steps given below to start the Windows Update service:

1. Press the Windows + R keys to open the Run utility box. Type in “services.msc” in the field and hit the Enter key.

1. Now, look for Windows Update in the services window and double click on it.
2. From the pop-up window, click on the drop-down arrow next to the Startup Type section. Select Automatic from the drop-down list.

1. Next, click on the Start button underneath Service status (if the service status says Stopped)

1. Click on Apply to save all these changes and then, click on OK.
2. Then, right-click on Windows Update and select the Restart option.

Method 3. Run System File Checker (SFC) And DISM

The Windows 10 update error 0x80070422 often occurs due to corrupt system files. System File Checker (SFC) is a built-in Windows utility that allows the user to scan and restore corrupted system files. So, scanning your device via the SFC utility will be helpful. Follow the steps given below to use SFC for scanning the 0x80070422 error code:

1. Go to the Start menu and type Command Prompt in the search box. Right-click the app in the search box and click on the Run as administrator option.
2. In the command prompt, type in sfc/scannow and press the Enter key. The SFC tool will scan your entire system and identify the damaged files.

1. The process can take several minutes to complete. Wait patiently till the procedure is finished and the Windows 10 update error 0x80070422 is gone or not.
2. After the System File Checker scan is completed, you can go for another command:

DISM /Online /Cleanup-Image /RestoreHealth

1. Press the Enter key and once, the above command has been executed, go for the following commands and press Enter after each of these:

net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver
Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
Ren C:\Windows\System32\catroot2 Catroot2.old
net start wuauserv
net start cryptSvc
net start bits
net start msiserver

1. Close the command prompt window and restart your system. Try installing the Windows update again and check if the error still prevails.

The related services and the Windows Update service are important for the proper installation of Windows updates and the working of Windows. So, you must ensure that the related services are also working fine. Many users have reported restarting the Network List service fixes the 0x80070422 error.

Go through the following steps to know how to set up the related services:

1. Press the Windows + R key to open the Run dialog box and type in services.msc.
2. Locate the Network List Service in the Services manager window. Right-click on it and click on the Restart option.

1. Check if the following services are running or not. If any of these is not running, right-click on it and click on Start.
   1. Networking Connections
   2. Windows Firewall
   3. DCOM Server Process Launcher
   4. BitLocker Drive Encryption Service
   5. Windows Event Collector
   6. Windows Event Log

Once you have started all the above-stated services, check if the Windows 10 error code 0x80070422 gets resolved.

Method 5. Run Windows Update Reset Script

1. Visit this Microsoft page. On the page, keep scrolling till you find “Download Windows update reset script for computers running Windows 10.”

1. Click on it and download the Windows Update reset script
2. Once the download is completed, click on the file > Show in folder
3. Right-click on the downloaded file and click on Extract All > Extract

1. Once done, open the Wureset Windows 10 folder and then, right-click on the WuRest file. Click on Run as administrator and then on Yes to allow.

1. Press any key to continue and let the process finish. It will take some time to complete.

1. Once done, press any key to continue. The command prompt window will close. Restart the system and run the Windows update to check if the error is gone.

Method 6. Disable Internet Protocol Version 6

You must already know that Windows updates rely on your internet connection. So, problems with your internet might also give rise to this error. Users have reported that disabling IPv6 resolves the Windows 10 update error 0x80070422. 

Many devices haven’t yet switched to using IPv6 in Windows 10. So, if it causes a problem, you can disable it without any worries. Here are the steps for disabling IPv6:

1. Press the Windows + R keys to launch the Run dialog box. Type in ncpa.cpl in the field given and hit the Enter key.
2. Right-click on the name of the internet connection connected to your system and click on the Properties option
3. Next, under the This connection uses the following items section, go to the Internet Protocol Version 6 (TPC/IPv6) option and unmark its checkbox.

1. Once you have finished all the above steps, reboot the computer and check if the error is gone or not.

You can also disable the IPv6 via the Registry Editor. Here’s how:

1. Click on the Windows search icon and type in regedit in the search bar. Choose Registry Editor from the search results.
2. Go to the following location:  HKEY_LOCAL_MACHINE\SYSTEM\Current\Control\SetServices\TCPIP6\Parameters
3. Next, right-click on Parameters from the left panel. Choose New followed by DWORD (32-bit) value.

1. Enter Disabled Components in the name field.

1. Right-click on the new DisabledComponents value and select Modify.
2. Type in ffffffffin the Value data field (with the Base set as hexadecimal) and click on OK to allow the changes to take place.
3. Close the Registry Editor and then, restart your system
4. If you wish to enable IPv6, go to the same key location and change the value of DisabledComponents to 0 or delete it.

Method 8. Enable/Disable Network List Service

Many users have reported that disabling/enabling the Network List Service has helped them get rid of the 0x80070422 error. The Network List Service is responsible for identifying the network connected to your system and collecting and storing its properties. 

Disabling or enabling the Network List Service depends on the initial state of the service. For example, if the service is in running status, disable it and if it is stopped, enable it. Here’s how you can do this:

1. Press the Windows + R keys to open the Run utility. Type in services.msc in the Run utility’s field and hit the Enter key.
2. Next, go to the Network List service and double-click on it to open the Network List Service Properties window.
3. Click on the dropdown menu beside the Startup Type and choose Automatic. Next, click on Start if the service status is stopped.

If you see that the service status is running, choose Disabled from the drop-down menu beside the Startup Type field. Next, click on Stop from the Service Status.

1. Once done, click Apply followed by OK to allow the changes to take effect.

Method 9. Create A .BAT File To Fix This Error

Creating a .BAT file allows you to download and install new features successfully while updating the Windows OS. Hence, this method can also help you fix the error code 0x80070422. Follow the steps given below to create a .BAT file:

1. Press the Windows + R keys to open the Run dialog box and type in notepad. Hit the Enter key and this will open up the Notepad app.
2. Next, copy-paste the following text in the notepad:

Notepad:sc config wuauserv start= auto
sc config bits start= auto
sc config DcomLaunch start= auto
net stop wuauserv
net start wuauserv
net stop bits
net start bits
net start DcomLaunch

1. Press the Ctrl + S keys to save the text as All Files and then, name it repair.bat. Then, look for where you want to save this .BAT file and click on Save.
2. Go to the location of the .BAT file you save and right-click on it. Select the Run as administrator option.
3. Now, an elevated command prompt window will open up. Click on Yes to execute the commands.

Method 9. Check Registry Entries

If the Windows update error 0x80070422 hasn’t been resolved, you need to check out some Registry entries and ensure they are correct. Note that editing the registry improperly might damage the system, so be careful while making registry edits. Here are the steps you need to follow for the same:

1. Press the Windows + R key to open the Run utility. Type in “regedit” in the run utility box and hit the Enter key.
2. Go to the following path:

HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > Windows Update > Auto Update

1. Next, double click on the Default file and set its value to 1 in the Edit String window.
2. If the above key can’t be found or didn’t solve the issue, you can try changing the following key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AppXSvc

1. Now, check its Start value. If it is anything other than 3, double-click on it and change the value to 3. Then, reboot the system.

Method 10. Try A Repair Upgrade With The Media Creation Tool

This method will reinstall Windows without affecting your files and software. It will replace all corrupted files (if found). Here are the steps you need to follow to perform a repair upgrade:

1. Go to the Microsoft Store and download the Media Creation Tool

1. Next, run the MediaCreationTool.exe
2. Choose the option Upgrade this PC now

1. Select the option Keep personal files and apps if you don’t want to lose your files.

1. Next, try installing the Windows Update you want to install.

Method 11. Run Windows 10 Update Troubleshooter

The Windows Update Troubleshooter is a built-in utility tool in the Windows 10 OS. This tool can help you quickly fix issues with the Windows Update service. If none of the above fixes helped you resolve the issue, there might be a deeper problem. 

So, running the Windows Update troubleshooter might help resolve the 0x80070422 error code.

1. Click the Windows menu icon and type in Windows Update in the search box. Next, select Windows Update Settings from the search results.

1. From the pop-up window, click on Troubleshoot located in the left pane under the Update & Security section.

1. Click on Additional Troubleshooters
2. Click on Windows Update and click on the Run the troubleshooter option.

1. The Windows Update Troubleshooter will start detecting problems and serve you with solutions if any problem is found.
2. After it is done fixing the problems, close the Windows Update Troubleshooter window and check if the error is gone or not.

Bottomline

This article discusses some of the most effective ways to fix the Windows 10 error 0x80070422. Hopefully, your issue has been solved after following these methods. If none of the above solutions helped, try doing an in-place reinstall of Windows 10 OS. Once the error is fixed, you should be able to install and download the Windows updates again to keep your computer up and running!