How does the nervous system use both electrical and chemical processes to function?

Neurons are the most fundamental unit of the nervous system, and yet, researchers are just beginning to understand how they perform the complex computations that underlie our behavior. We asked Boaz Barak, previously a postdoc in Guoping Feng’s lab at the McGovern Institute and now Senior Lecturer at the School of Psychological Sciences and Sagol School of Neuroscience at Tel Aviv University, to unpack the basics of neuron communication for us.

“Neurons communicate with each other through electrical and chemical signals,” explains Barak. “The electrical signal, or action potential, runs from the cell body area to the axon terminals, through a thin fiber called axon. Some of these axons can be very long and most of them are very short. The electrical signal that runs along the axon is based on ion movement. The speed of the signal transmission is influenced by an insulating layer called myelin,” he explains.

Myelin is a fatty layer formed, in the vertebrate central nervous system, by concentric wrapping of oligodendrocyte cell processes around axons. The term “myelin” was coined in 1854 by Virchow (whose penchant for Greek and for naming new structures also led to the terms amyloid, leukemia, and chromatin). In more modern images, the myelin sheath is beautifully visible as concentric spirals surrounding the “tube” of the axon itself. Neurons in the peripheral nervous system are also myelinated, but the cells responsible for myelination are Schwann cells, rather than oligodendrocytes.

“Neurons communicate with each other through electrical and chemical signals,” explains Boaz Barak.

“Myelin’s main purpose is to insulate the neuron’s axon,” Barak says. “It speeds up conductivity and the transmission of electrical impulses. Myelin promotes fast transmission of electrical signals mainly by affecting two factors: 1) increasing electrical resistance, or reducing leakage of the electrical signal and ions along the axon, “trapping” them inside the axon and 2) decreasing membrane capacitance by increasing the distance between conducting materials inside the axon (intracellular fluids) and outside of it (extracellular fluids).”

Adjacent sections of axon in a given neuron are each surrounded by a distinct myelin sheath. Unmyelinated gaps between adjacent ensheathed regions of the axon are called Nodes of Ranvier, and are critical to fast transmission of action potentials, in what is termed “saltatory conduction.” A useful analogy is that if the axon itself is like an electrical wire, myelin is like insulation that surrounds it, speeding up impulse propagation, and overcoming the decrease in action potential size that would occur during transmission along a naked axon due to electrical signal leakage, how the myelin sheath promotes fast transmission that allows neurons to transmit information long distances in a timely fashion in the vertebrate nervous system.

Myelin seems to be critical to healthy functioning of the nervous system; in fact, disruptions in the myelin sheath have been linked to a variety of disorders.

How does the nervous system use both electrical and chemical processes to function?
Former McGovern postdoc, Boaz Barak. Photo: Justin Knight

“Abnormal myelination can arise from abnormal development caused by genetic alterations,” Barak explains further. “Demyelination can even occur, due to an autoimmune response, trauma, and other causes. In neurological conditions in which myelin properties are abnormal, as in the case of lesions or plaques, signal transmission can be affected. For example, defects in myelin can lead to lack of neuronal communication, as there may be a delay or reduction in transmission of electrical and chemical signals. Also, in cases of abnormal myelination, it is possible that the synchronicity of brain region activity might be affected, for example, leading to improper actions and behaviors.”

Researchers are still working to fully understand the role of myelin in disorders. Myelin has a long history of being evasive though, with its origins in the central nervous system being unclear for many years. For a period of time, the origin of myelin was thought to be the axon itself, and it was only after initial discovery (by Robertson, 1899), re-discovery (Del Rio-Hortega, 1919), and skepticism followed by eventual confirmation, that the role of oligodendrocytes in forming myelin became clear. With modern imaging and genetic tools, we should be able to increasingly understand its role in the healthy, as well as a compromised, nervous system.

Do you have a question for The Brain? Ask it here.

Key facts: action potential and synapses

  • Neurons communicate with each other via electrical events called ‘action potentials’ and chemical neurotransmitters.
  • At the junction between two neurons (synapse), an action potential causes neuron A to release a chemical neurotransmitter.
  • The neurotransmitter can either help (excite) or hinder (inhibit) neuron B from firing its own action potential.
  • In an intact brain, the balance of hundreds of excitatory and inhibitory inputs to a neuron determines whether an action potential will result.

Neurons are essentially electrical devices. There are many channels sitting in the cell membrane (the boundary between a cell’s inside and outside) that allow positive or negative ions to flow into and out of the cell.

Normally, the inside of the cell is more negative than the outside; neuroscientists say that the inside is around -70 mV with respect to the outside, or that the cell’s resting membrane potential is -70 mV.

This membrane potential isn’t static. It’s constantly going up and down, depending mostly on the inputs coming from the axons of other neurons. Some inputs make the neuron’s membrane potential become more positive (or less negative, e.g. from -70 mV to -65 mV), and others do the opposite.

These are respectively termed excitatory and inhibitory inputs, as they promote or inhibit the generation of action potentials (the reason some inputs are excitatory and others inhibitory is that different types of neuron release different neurotransmitters; the neurotransmitter used by a neuron determines its effect).

Action potentials are the fundamental units of communication between neurons and occur when the sum total of all of the excitatory and inhibitory inputs makes the neuron’s membrane potential reach around -50 mV (see diagram), a value called the action potential threshold.

Neuroscientists often refer to action potentials as ‘spikes’, or say a neuron has ‘fired a spike’ or ‘spiked’. The term is a reference to the shape of an action potential as recorded using sensitive electrical equipment.

How does the nervous system use both electrical and chemical processes to function?

A neuron spikes when a combination of all the excitation and inhibition it receives makes it reach threshold. On the right is an example from an actual neuron in the mouse's cortex. (Image: Alan Woodruff / QBI)

Synapses: how neurons communicate with each other

Neurons talk to each other across synapses. When an action potential reaches the presynaptic terminal, it causes neurotransmitter to be released from the neuron into the synaptic cleft, a 20–40nm gap between the presynaptic axon terminal and the postsynaptic dendrite (often a spine).

After travelling across the synaptic cleft, the transmitter will attach to neurotransmitter receptors on the postsynaptic side, and depending on the neurotransmitter released (which is dependent on the type of neuron releasing it), particular positive (e.g. Na+, K+, Ca+) or negative ions (e.g. Cl-) will travel through channels that span the membrane.

Synapses can be thought of as converting an electrical signal (the action potential) into a chemical signal in the form of neurotransmitter release, and then, upon binding of the transmitter to the postsynaptic receptor, switching the signal back again into an electrical form, as charged ions flow into or out of the postsynaptic neuron.

How does the nervous system use both electrical and chemical processes to function?

An action potential, or spike, causes neurotransmitters to be released across the synaptic cleft, causing an electrical signal in the postsynaptic neuron. (Image: By Thomas Splettstoesser / CC BY-SA 4.0)

Video: Action potentials in neurons

Concepts and definitions

Axon– The long, thin structure in which action potentials are generated; the transmitting part of the neuron. After initiation, action potentials travel down axons to cause release of neurotransmitter.

Dendrite – The receiving part of the neuron. Dendrites receive synaptic inputs from axons, with the sum total of dendritic inputs determining whether the neuron will fire an action potential.

Spine – The small protrusions found on dendrites that are, for many synapses, the postsynaptic contact site.

Membrane potential – The electrical potential across the neuron's cell membrane, which arises due to different distributions of positively and negatively charged ions within and outside of the cell. The value inside of the cell is always stated relative to the outside: -70 mV means the inside is 70 mV more negative than the outside (which is given a value of 0 mV).

Action potential – Brief (~1 ms) electrical event typically generated in the axon that signals the neuron as 'active'. An action potential travels the length of the axon and causes release of neurotransmitter into the synapse. The action potential and consequent transmitter release allow the neuron to communicate with other neurons.

Neurotransmitter – A chemical released from a neuron following an action potential. The neurotransmitter travels across the synapse to excite or inhibit the target neuron. Different types of neurons use different neurotransmitters and therefore have different effects on their targets. 

Synapse – The junction between the axon of one neuron and the dendrite of another, through which the two neurons communicate.

QBI research

QBI Laboratories working on neurons and neuronal communication: Professor Stephen Williams, Professor Pankaj Sah

QBI Laboratories working on synapses: Dr Victor Anggono, Professor Joseph Lynch, Professor Frederic Meunier

How are nervous system signals both electrical and chemical?

Neurons communicate using both electrical and chemical signals. Sensory stimuli are converted to electrical signals. Action potentials are electrical signals carried along neurons. Synapses are chemical or electrical junctions that allow electrical signals to pass from neurons to other cells.

How does the nervous system communicate electrical and chemical messages from one part to another?

Two mechanisms have evolved to transmit nerve signals. First, within cells, electrical signals are conveyed along the cell membrane. Second, for communication between cells, the electrical signals generally are converted into chemical signals conveyed by small messenger molecules called neurotransmitters.

Does nervous system use electrical and chemical signals to communicate internally?

Nerve cells (i.e., neurons) communicate via a combination of electrical and chemical signals. Within the neuron, electrical signals driven by charged particles allow rapid conduction from one end of the cell to the other.

How does the nervous system use chemicals?

Neurotransmitters are chemical messengers that your body can't function without. Their job is to carry chemical signals (“messages”) from one neuron (nerve cell) to the next target cell. The next target cell can be another nerve cell, a muscle cell or a gland.